Overview of a Crane Truck

A crane truck is a multi-faceted piece of equipment, based on simple physics that is used to lift heavy, unwieldy objects. Crane trucks have a multitude of uses from hoisting equipment at heavy construction sites, loading ships, and used for delicate operations such as moving a whale from a flatbed truck to an aqua arena.
Cranes are based on physics principles dating back to the Ancient Greeks who figured out that using a lever and a fulcrum can be used to lift a heavy load. The principle of the lever, allows a heavy load attached to the shorter end of a beam, can be lifted by a small force applied to the opposite, longer end of the beam. Lift happens with the help of the fulcrum that is placed under the beam to support the lift height. Later, they added a hand-winding winch with cables tied to a pulley. They wrapped cables around objects to lift and move them from Point A to Point B, very similar to what you see today. Today’s cranes lift thousands of tons with the help of a hydraulic system.

Chain hoist, Electric Chain Hoist, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

A crane truck’s basic equipment consists of the following:
· Boom is the most recognizable part of the crane, the long, telescoping arm responsible for moving objects
· Counterweights are at the rear of the truck’s cab to stop it from tipping over from heavy lifts.
· Jib is the lattice structure that allows the boom to extend.
· Outriggers keep the crane balanced.
· Rotex gear allows the boom to rotate.
Crane trucks are usually for rent on a daily or long-term basis, along with the operator who is licensed and certified to run the crane.

Hoist Fitness Equipment - Honing Hamstrings Without a Hitch

When Hoist Fitness Equipment started to flex its muscles in 1977, they also raised the bar for other manufacturers. Today this dynamic San Diego company still stands out as one of the front runners in the industry.
Not only do they offer innovative lines for gyms, but the Hoist fitness equipment range for home use, has become the number one choice of many fitness fanatics. Add to this their wheelchair-friendly line, and the KL fitness circuit for kids, and you have to conclude that Hoist is a gym equipment giant. Their bench-mark is precision building, and advanced engineering.
The wheelchair-accessible H-480 Single Stack Access Trainer is testament to the creativity and design excellence behind Hoist fitness equipment. Any upper body exercise can be done with safety and confidence. The manual included is informative and detailed.
As with other Hoist fitness equipment, all the exercises are done at the front of this space-efficient machine, enabling wall mounting. The Access offers a total body workout, yet the size of the footprint makes it one of the smallest gyms available. The Access trainer converts to able-bodied mode with one pull pin adjustment.
The Access trainer has been created by Hoist fitness equipment, as the ultimate solution to making a strength-building gym experience available to a wider spectrum of people.
There is a growing awareness of the importance of acquiring healthy habits from an early age. Childhood obesity due to inactivity, can no longer be ignored. The manufacturers of Hoist fitness equipment shared this concern, and developed the impressive KL Children’s Fitness product line.
Through careful innovative design, the range imitates the natural patterns of play and movement. The KL line capitalizes on children’s natural affinity for running, jumping, and jungle gym activities. Unique bio-mechanical motions create terrific fun, while subtly targeting muscle groups.
The nine piece Hoist fitness equipment KL circuit include an abdominal bench, hip extension press, leg press, shoulder press, squat press, seated dip, seated row, pull up, and chest press.

Electric Chain Hoist, Jib Crane, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

Discovering the V5 Multi Gym, will keep you at home, exercising! This single-stack home gym is one of the best and most varied available. This design by Hoist fitness equipment, gives you a workout that includes hard-to-reach muscle groups, often neglected with other systems.
The leg curl station can also be adjusted for leg extension exercises. The 4-D articulating press arm allows for a variety of movements. You also have access to variations such as a chest press, lat pulldown, leg press, and a chest-high cable for core strengthening exercises.
Hoist fitness equipment is known for its versatility. In this instance, you have various options, such as adding a VLP Leg Press station.
The H-4600-HS Multi Stack Gym is another versatile, commercial quality line in the Hoist Fitness Equipment range, suitable for homes and smaller outfits. The trademarked Silent Steel weight stacks, ensure smooth and quiet operation.
A variety of optional extras are available, promising even greater comfort and effectiveness. An example is the bicep curl station, with changeable handgrip positions for isolating different muscle groups. An optional weight stack enclosure, adds an element of safety.
The Hoist fitness equipment Freeweights range offers a choice of dumbbells, benches, racks, and cages.
The dumbbell line includes the Quick Change Dumbbell System, with a SGMA award behind its name. In line with the Hoist fitness equipment tradition, this is an extremely cost-effective and space-saving piece. Among the freeweight options, you have access to a Leg Extension / Leg Curl machine, or the Abdominal / Back Extension unit.
A variety of racks are available, including the HF-477 Short Vertical Dumbbell Stand, which holds 5 pairs of dumbbells. No assembly is needed. The charcoal powdercoat finish is similar to the multi stack and multi gym lines of Hoist fitness equipment.
Benches include the HF-167 Folding Flat / Incline Bench, also a hugely popular space-saving design. Another option is the electric hoist HF-663 45 Degree Back Hyperextension bench. A large foot plate, and 4 adjustable positions are some of its features. The thigh brace can be adjusted to make provision for taller users.
New products include the lightweight Adjustable Ab / Back Hyper Bench. This dual-purpose, robust item has self-aligning roller pads, and is comfortable to use, irrespective of your fitness level or height. It folds flat for easy storage. In the same category of Hoist fitness equipment, you will find the Flat / Incline / Decline Bench with seven adjustments, convenient wheels, and an adjustable seat.
The background of the pioneering Hoist fitness equipment team, includes experience in running a fitness center. This explains why they have such an in depth understanding of the industry, and customer preferences. With such knowledgeable support behind you, any fitness goal should be within easy reach.

Inspection and Repairs in Frame Construction

Learn How to Sail - Sailing with a Spinnaker A spinnaker is a large sail that replaces the Genoa in light winds, it has its own technique when spinnaker handling and it must be emphasized at this stage, that there is no substitute for practice or development to flying a spinnaker. A spinnaker is probably one of the more difficult sails to hoist, being in light winds and a large sail area it can have a tendency to twist and tangle around the forestay if not hoisted correctly.
Firstly the spinnaker should be packed into its sailing bag in the correct manner. The port, starboard and halyard connection eyes should be tide off to the sail bag top after packing the spinnaker into the sail bag, and in preparation of connecting the port, starboard sheets and the spinnaker halyard.
Hoisting Equipment and rigging a spinnaker. There are many different makes of equipment from which to choose when equipping a new boat. Choose the most suitable for your boat that will take the appropriate loads and size of spinnaker.
You will require a spinnaker pole that is the correct length and diameter for your boat, it will have an up & down haul mid connection eyes, the end connections should be snap-on stainless steel piston type with quick release trip lines.
The spinnaker pole will connect to the mast by clipping one piston end of the spinnaker pole onto the fixed eye on the mast. The up haul and down haul system should then be connected to the mid pole eyes. The other end of the spinnaker pole will be clipped to either the port or starboard sheets whichever is on the windward side of your point of sail, it should not be connected to the clew of the spinnaker. The object of the pole is to help the wind flow into the sail area and maintain the shape of the spinnaker.
The up haul and down haul system will be fully adjustable and controlled from the cockpit. The down haul will be taking the entire load from the spinnaker and should be rigged accordingly. The up haul will hold the pole in a horizontal position when set.
The port & starboard sheets will be connected to the spinnaker and then run back to the stern of the boat and round a suitable roller cleats and returned to the spinnaker winches, therefore being controlled from the cockpit of the boat.
Chain hoist, Electric Chain Hoist, Jib Crane, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

The spinnaker halyard should have a swivel connection to the spinnaker head; this will help the spinnaker in adjusting itself when being hoisted. You are now ready to hoist the spinnaker, steer the boat with a favourable windward intake into the spinnaker. You will need one crew at the spinnaker bag to assist the emptying of the sail and free any tangling that might happen thus, shaking it free.
The main spinnaker halyard should be hoisted as quickly as possible but keeping one eye on the spinnakers wind filling progress and adjusting the port and starboard sheets as required. The spinnaker pole can be finally adjusted when the spinnaker is fully hoisted with the up and down haul winches.
When you come to dropping the spinnaker sail it should be undertaken as follows;
Use the port or starboard sheet that is on the leeward side of the sail i.e. the opposite side to the spinnaker poles position. On the command of the skipper the spinnaker halyard will be released and dropped under control, at the same time a crew member will pull in the sail using the port or starboard sheet chosen and trying not to get the spinnaker sail in the water!. The spinnaker sail could then be packed back into its sail bag correctly ready for re-hoisting at a future time.

Finding The Right Equipment To Achieve Your Fitness Goals

Many people today are making the decision to workout and achieve better physical conditioning. Unfortunately, for most people that’s all it is-a decision.
They never actually take the steps necessary to achieve those goals. The reason for this is they set impossible goals that could never be achieved.
A very quick and relatively easy method to achieve you fitness goals is with the aid of hoisting equipment for a home gym. When you have to get in your car and drive a half hour every time you want to work out, you won’t have much incentive to complete your goals. When all you have to do when you get home from work is throw on some workout clothes and begin exercising, you have a lot more incentive to get started.
The first thing to do when searching for exercise equipment for your home gym is to determine what type of workout you really need and also enjoy. For instance, you might be a great distance runner, but it might be time to develop those upper body muscles. If that’s the case, than you’ll want to purchase a weight set or equipment that focuses on your upper body.

Chain hoist, Electric Chain Hoist,Jib Crane, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

If you don’t work out at all and have no idea where to start, it’s best to start doing what you enjoy. For instance, if you know that you enjoy running but hate the thought to lifting weights, don’t purchase a weight machine out of guilt; buy the treadmill and start achieving good health.
There is nothing more wasteful than purchasing exercise equipment for your home gym that you will never use. Unfortunately, all too many people make their buying decisions out of guilt; they know they should be doing a certain workout, so they force themselves to purchase the equipment; 5 months later, they haven’t even touched it.
Once the right workout is established, you will want to find the best brand name to purchase. Fortunately, this process is relatively easy. Don’t go to the store to find what you want; often times the salesman will pitch every piece of equipment that the store sells and you won’t get an honest appraisal.Do your research on the internet; there are many great online reviews of the different exercise equipment for your home gym and their overall reliability. Once you find one that consistently gets good ratings from the experts and satisfied customers, only then should you move forward with your purchase.
Follow these simple tips to finding the right exercise equipment for your home gym, and you will be on your way to achieving your fitness goals quickly and easily.
The most important step? Get started today. Don’t wait until tomorrow or the next day; just buy the exercise equipment for your home gym, establish a plan to achieve your goals, and take action immediately.

Portable Cantilever Hoists

Whenever you need to be able to hoisting equipment or lift a weighty object from the floor onto a higher level, having a lifting system that you can rely on is essential. Unfortunately, there are always situations where it is simply not possible to use conventional lifting gear such as jibs or fork lifts, and under these situations, when it is necessary to be able to raise a weight quickly, then a cantilever hoist is often the best choice.
These small portable cranes are ideal for lifting heavy weights up to 4,000 pounds depending on the model, and are designed to be used in circumstances when other alternatives are unavailable. The high specification of the cantilever hoists offered makes them a formidable option for any workplace, and they provide a fully reliable and useful addition to any arsenal of equipment.
The standard cantilever electric hoist is a well made and sturdy device that can be moved easily into place wherever it is required, and then can raise heavy weights effortlessly thanks to its heavy duty hand pumped hydraulic pump lifting system that can lift 2,000 pounds onto a truck in seconds.
The principal concern whenever lifting heavy objects on an uneven surface is to ensure stability. The basic design premise of a cantilever hoist is to include a heavy counter weight that opposes the load and ensures longitudinal stability in use. This use of a counterweight is backed up by a relatively wide chassis on fully lockable 8 inches by 2 inches phenolic casters.
In order to offer additional support under circumstances where it is required, the cantilever hoist also offers a set of easy to set out riggers that ensure lateral stability under almost any conditions. Optionally, a ballast can be added for counterbalance, for added stability for heavy duty tasks.
The boom on the hoist is hard wearing and designed to last. It sits on a 360 degree rotating joint to allow for a weight to be hoisted off the ground and then swung effortlessly into the back of a truck or onto a raised working surface.
The key to efficient and safe handling of any heavy weight is control, and the cantilever hoists offered by easy rack are designed with this in mind from the outset. Aside from the sealed hydraulic system that has been created to ensure maximum lift and smooth action, the release of the system is also restricted so that it does not just drop the object into place.

Electric Chain Hoist, Jib Crane, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

Smooth lowering of the load means that it can be placed accurately and gently in order to protect both it and the surface onto which it is being lowered.
The main use for this lifting tool is undoubtedly in hoisting weights onto the back of a truck, but thanks to the ease with which it can be deployed almost anywhere in a matter of minutes, it is a useful back up for many situations, and can even be utilized for hoisting an engine block from a vehicle if necessary, as well as any other heavy lifting job that you need a tool you can rely on for.

Portable Cantilever Hoists

Whenever you need to be able to hoist or lift a weighty object from the floor onto a higher level, having a lifting system that you can rely on is essential. Unfortunately, there are always situations where it is simply not possible to use conventional lifting gear such as jibs or fork lifts, and under these situations, when it is necessary to be able to raise a weight quickly, then a cantilever hoist is often the best choice.
These small portable cranes are ideal for lifting heavy weights up to 4,000 pounds depending on the model, and are designed to be used in circumstances when other alternatives are unavailable. The high specification of the cantilever hoists offered makes them a formidable option for any workplace, and they provide a fully reliable and useful addition to any arsenal of equipment.
The standard cantilever hoist is a well made and sturdy device that can be moved easily into place wherever it is required, and then can raise heavy weights effortlessly thanks to its heavy duty hand pumped hydraulic pump lifting system that can lift 2,000 pounds onto a truck in seconds.
The principal concern whenever lifting heavy objects on an uneven surface is to ensure stability. The basic design premise of a cantilever hoist is to include a heavy counter weight that opposes the load and ensures longitudinal stability in use. This use of a counterweight is backed up by a relatively wide chassis on fully lockable 8 inches by 2 inches phenolic casters.
Chain hoist, Electric Chain Hoist, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

In order to offer additional support under circumstances where it is required, the cantilever hoist also offers a set of easy to set out riggers that ensure lateral stability under almost any conditions. Optionally, a ballast can be added for counterbalance, for added stability for heavy duty tasks.
The boom on the hoisting equipment is hard wearing and designed to last. It sits on a 360 degree rotating joint to allow for a weight to be hoisted off the ground and then swung effortlessly into the back of a truck or onto a raised working surface.
The key to efficient and safe handling of any heavy weight is control, and the cantilever hoists offered by easy rack are designed with this in mind from the outset. Aside from the sealed hydraulic system that has been created to ensure maximum lift and smooth action, the release of the system is also restricted so that it does not just drop the object into place.
Smooth lowering of the load means that it can be placed accurately and gently in order to protect both it and the surface onto which it is being lowered.
The main use for this lifting tool is undoubtedly in hoisting weights onto the back of a truck, but thanks to the ease with which it can be deployed almost anywhere in a matter of minutes, it is a useful back up for many situations, and can even be utilized for hoisting an engine block from a vehicle if necessary, as well as any other heavy lifting job that you need a tool you can rely on for.

Excavators and Backhoes

Heavy Equipment Operator
Ever wonder how men and women operate heavy equipment? Some, not all go to Equipment Operator School . I was lucky to have a job as a truck driver slash labor in my younger days in the pipeline industry. At the time I was installing water mains. I would work watching the operators digging and backfilling trenches, loading trucks, thinking to myself, wish I could do that, so every chance I got when we were in safe areasaway from the danger of hitting people and underground utilities, I would ask! Can I give it a try ? Most of the Hoisting equipment operators I worked with were cool (so to speak) they would let me dig and operate an that gave me my start
Today in almost all areas in order to Operate Heavy Equipment you must have a special license.

Chain hoist, Electric Chain Hoist, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

Here in New England you need a hoisting license for Backhoes, Excavators, Forklifts, Cranes equipment etc. If you don’t have a place to practice like I did search the web, There are many schools,and training facilities, also Union halls and Operating Engineers. heres a site with lots of info about heavy equipment , schools etc.Heavy Equipment You can find some nice photos on the web also. My occupation as a Union equipment operator has been great most of the time, I have had new employees like myself in the early days wanting to give it a try, I always allow them providing we are in a safe area, hey, thats how I started. I’m now installing Natural gas pipelines all over the Northeast. Becoming an equipment operator is only a click or phone call away ! —-Good Luck—–

Alaska King Crab Fishing Jobs

The boats used for Alaska crab fishing jobs are between 12 and 75 meters (40 to 250 feet) in length and are equipped with hydraulic systems to lift the catch from the sea and onto the deck, the boats and the equipment aboard these vessels are designed to withstand the freezing weather of the Bering Sea. Each boat can stay out at sea for days or weeks at a time.
The traps or pots that are used to catch the crabs are a steel box-shaped trap consisting of a steel frame covered with a wire mesh, bait is placed in the inside, usually a herring or codfish, the pot is then sunk to the sea floor where the king crab reside. Alaska King Crab Fishing Jobs vessels may carry up to 300 pots on a single trip which are all placed in a straight line to make retrieval easier.
Chain hoist, Electric Chain Hoist, Jib Crane, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer

The king crab in the pots are sorted once they are brought to the surface, and any not meeting the regulation requirements are thrown back. The king crab are typically stored live in a holding tank until the boat reaches shore, where they are sold. If the weather becomes too cold, the live king crab may freeze and burst. If they are left in the tank for too long, they will harm and possibly kill each other, as they can be cannibalistic.
Having Alaska king crab fishing jobs are probably one of the most demanding types of fishing around as the season is short and the hours are long, It has become a very popular industry through the popularity of the Discovery Channel programme “deadliest catch”.
The entry level Alaska crab fishing jobs position is that of a Deckhand or Greenhorn, The duties of a deckhand includes loading and unloading supplies, fish and fishing equipment by hand or using hoisting equipment. Preparing and setting nets and other fishing equipment. Removing the catch from the fishing equipment, measuring and sorting it and returning undersize or unwanted fish to the water. Storing or packing the catch in the holds with ice and/or salt (brine). Cleaning the vessel and fishing equipment. Fishing deckhands need to be self-motivated and strong both physically and mentally. They need the stamina to be able to work in dangerous conditions, while being self-disciplined and alert to their surroundings at all times.
So if you are looking for excitement by securing one of the Alaska King Crab Fishing Jobs, I would suggest you consider a number of important issues before you start applying:
What job will be suited to your qualifications and skills
What the working conditions are like
Whether you need any additional training before applying for work
Where exactly to look for fishing employment
How do you go about applying for a job
The types of licenses needed to captain a Fishing Vessel
Organizations you may need to make contact with
What obligations there are regarding licensing and paying catch royalties
The exact processes of the different methods of fishing
What equipment is needed to be part of the Alaska King Crab Fishing Industry

Help I Need a Crane Hoist

Help I Need a Crane Hoist!
Here at JIB’s, we have what you need when you need it and how you need it. Our motto is if we can’t make it, it does not exist. But then again, we will help develop it for you. So keeping in mind that many of our products like our crane hoist and overhead cranes are designed and fabricated by our own engineering and fabrication staff, you will understand that there is almost nothing we cannot make or develop. This puts our company far above the competitor and gives JIB the leading edge in crane building. And like our overhead bridge cranes, JIB will not let you down unless you want us to. So when you are looking to buy quality at the best price, just give us a call. You will be happy you did.
So if you find yourself in a position that you have the need for one of these cranes or hoists, just remember that JIB can provide you with a perfect operating custom made overhead crane that will handle the heavy payload that you need to produce. But there is more to JIB than just custom made cranes. We are also specialists in hoisting and hoisting equipment, so any lifting that needs to be done at your plant can be facilitated by our custom build engineers. So in short, JIBS Crane Company is the answer to all your lifting and material handling needs. We have provided years of custom made solutions and thousands of hours of technical support to our costumers and are looking forward to a new challenge. What ever your need we will be there.

Chain hoist, Electric Chain Hoist, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer
One of our most important tasks in a day’s work however is not building or maintaining, it is the connection with our costumers that is without a doubt the most important task at hand. We are not in business to just sell our ware’s, we are in business to make long lasting contacts with the blue-collar workers that have made the U.S.A what it is today. We believe here at JIBS crane that you are what make our business special and that is what it is all about at JIB’s. Many of our new product idea’s come from you as a costumer. Whenever a client asks us for a new way of solving a problem they run into, it helps us become a better company. New innovations happen at a daily bases and we would not have it any other way. When thinking back on the days when we first started our JIB cranes, we could not have imagined where we would be today, and this all because of our costumers, new innovations, overcoming obstacles and the use of new technology. Even if you just want us to build you a bridge crane but you want to install it yourself we have a solution for you, just take a look at our Kit bridge cranes. But of course we will be there when you need us. So feel free to give us a call today.

Hoists Overview

Many different types of hoisting equipment are used in several industries today. You can find this type of equipment being used in the construction industry, in warehouses and even around peers when products or heavy apparatus needs to be lifted onto ships. Without these valuable pieces of equipment, many different industries would not be able to complete the many jobs that these hoists allow them to complete on a daily basis.
Air chain hoists are one piece of equipment hoists used to lift items from one place to another in warehouse situations. This can include items that are actually being loaded onto trucks for shipping and distribution or it might be equipment that is being used within the warehouse. The air chain hoist can lift between 500 and 2200 pounds, depending on what type of air chain hoist is being used. It is easy to see, with the amount of pounds that these types of cranes are able to lift and move, why these items are used as pieces of warehouse equipment.
In the world of electirc chain hoists, there are many different types of equipment that are used to complete different jobs. Overhead cranes are just an example of these. The overhead crane is used in industries such as construction and also in the automotive industry. When dealing with the automotive industry, these overhead cranes are used to lift car and truck parts that are normally too heavy to be lifted manually. It also makes the process happen much more quickly, as the overhead crane can lift the item easily and keep the automobile assembly process going.

Chain hoist, Jib Crane, Electric wire rope hoist, Mini Electric Hoist, Manual lifting series, Monorail trolley, Wire rope puller, Permanent magnetic lifter, Cable and switch control, Electric Chain Hoist Manufacturer
If it were not for hoists equipment, such as electric chain hoists or engine hoists, many different jobs could not be done nearly as efficiently or as quickly. We are very much dependent on this equipment to receive goods from warehouses or for the buildings that need to be built. If these types of cranes and lifting hoists did not exist, productions of buildings and the shipping of many items would be halted.