chain Lever Hoist

Features:
1. Capacities: from 250kg to 9,000kg
2. Quality System Certification:ISO9001 GS, CE
3. Warranty:1 year

4. Lever block is a kind of highly efficient and versatile hand operated hoisting appliance.

5.It is particularly used in the narrow places, the open air  and overhead places for pulling and  stretching work at any angle.

6.The lever block is safe, reliable and durable.

7.The lever block is of excellent performance, easy operation and convenience maintenance.

8.The lever block is of small volume, light weight and portable in size.

9.The lever block is of high efficiency, fast lifting and light hand pull.

10.The  structure is advanced and the appearance of lever hoist is attractive

* Shell: Light aluminum alloy shell shall be adopted which is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
* Inverse phase sequence protecting device: it is the special electrical installation which control the circuit not to work in case of wiring error in the power supply.
* Limit switch: The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.
* 24V/36V device: it is used to prohibit the emergencies from occurring in case of the leakage in the switch.
* Side magnetic braking device: This device shall realize the instant brake in case of the power dump.
* Chain bag: It shall be light, handsome and durable.
* Chain: The chain shall adopt the imported FEC80 ultra heat-treatable aluminum alloy chain.

ize Specification

“TXK” products: Electric Chain hoist range from 300kg to 25ton. Chain Block range from 250kg to 20ton. Lever Block range from 250kg to 9ton. Wire rope hoist range from 500kg to 20ton. Crane projects.

• 
  

  300-500KG

  
  * Shell: Light aluminum alloy shell shall be adopted which is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
  * Inverse phase sequence protecting device: it is the special electrical installation which control the circuit not to w…

• 
  

  1-3 ton

  
  * Shell: Light aluminum alloy shell shall be adopted which is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
  * Inverse phase sequence protecting device: it is the special electrical installation which control the circuit not to w…

• 
  

  1.5-5 ton

  
  * Shell: Light aluminum alloy shell shall be adopted which is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
  * Inverse phase sequence protecting device: it is the special electrical installation which control the circuit not to w…

Electric chain hoist, Electric hoist, Chain hoist, Hoisting equipment, Jib crane, Bridge Crane, Chain Block, Lever Block.

In order to offer additional support under circumstances where it is required, the cantilever hoist also offers a set of easy to set out riggers that ensure lateral stability under almost any conditions. Optionally, a ballast can be added for counterbalance, for added stability for heavy duty tasks.
The boom on the hoist is hard wearing and designed to last. It sits on a 360 degree rotating joint to allow for a weight to be hoisted off the ground and then swung effortlessly into the back of a truck or onto a raised working surface.
The key to efficient and safe handling of any heavy weight is control, and the cantilever hoists offered by easy rack are designed with this in mind from the outset. Aside from the sealed hydraulic system that has been created to ensure maximum lift and smooth action, the release of the system is also restricted so that it does not just drop the object into place.
Smooth lowering of the load means that it can be placed accurately and gently in order to protect both it and the surface onto which it is being lowered.
The main use for this lifting tool is undoubtedly in hoisting weights onto the back of a truck, but thanks to the ease with which it can be deployed almost anywhere in a matter of minutes, it is a useful back up for many situations, and can even be utilized for hoisting an engine block from a vehicle if necessary, as well as any other heavy lifting job that you need a tool you can rely on for.

Electric chain hoist, Electric hoist, Chain hoist, Hoisting equipment, Jib crane, Bridge Crane, Chain Block, Lever Block, Electric Chain Hoist Manufacturer,

In the lighting field, CHARLES F. BRUSH was the most prominent innovator and entrepreneur of the period. His major contribution was the practical development and commercial exploitation of the arc light. Although the latter was invented in England in 1808, Brush devised its practical application by developing an improved dynamo to provide a steady current, and by making design changes in the arc fixture itself that improved the quality of the light and extended the working life of the carbon electrodes. He also redesigned the lamp’s circuit to make arc lighting possible from central stations. Hoisting equipment Brush began to sell small arc lighting systems in the late 1870s for use in stores, factories, and hotels. However, the potential of this equipment was first realized with Brush’s demonstration of its street-lighting possibilities on 29 Apr. 1879, in Cleveland’s PUBLIC SQUARE. The brilliance of the light produced by his 12 lamps caused a sensation and foretold the decline of the gas-lighting era. As a result, Brush sold central power stations to San Francisco, New York, Baltimore, Boston, and Philadelphia. In 1880 Brush bought the Cleveland Telegraph Supply Co., where he had done the developmental work, and renamed it the Brush Electric chain hoist. The battle between electric and gas lighting lasted some 30 years, and although advances were made in gas-lighting technology, electricity won out. During that time, CLEVELAND CITY COUNCIL, viewing comparative costs, voted to go back to gas light in 1883 but reversed itself 17 days later. About the time that Brush was developing his arc light, Thomas Edison designed a practical incandescent lamp which later had great significance for Cleveland, because the companies that formed the National Electric Lamp Assn. in 1906 centered much of their light-bulb production in this area. When NELA became the National Quality Lamp Division of GENERAL ELECTRIC CO., it established NELA PARK in the SUBURBS. The division took the leading role in GE’s incandescent lighting development program from 1915 until 1935, when fluorescent lighting research became prominent.

Electric chain hoist, Electric hoist, Chain hoist, Hoisting equipment, Jib crane, Bridge Crane, Chain Block, Lever Block, Electric chain hoist.

Cranes
Cranes are equipped with pulleys and levers to haul up and lower sizeable weights. Basically, a crane has a telescopic boom or steel truss that hoists its portable base. Both the levers or pulleys lift the boom, and the boom typically has a hook hanging on it. There are several kinds of cranes including loader cranes and tower cranes. Loader cranes feature hydraulic power booms attached onto trailers. Booms load up materials onto the trailer and may be collapsed after use. Certain types of loader cranes feature telescopic boom for easy operation. Tower cranes are usually the tallest of all cranes. However, they do not feature portable base and parts need to be assembled. These cranes are largely applied to build tall structures and skyscrapers. Primarily exploited for the cutting down of workload, cranes can also perform lots of jobs including moving, digging and creating.
Concrete mixers or processors
Concrete mixers or processors are powered hoisting equipment used for mixing cement, water, sand, and gravel to create concrete. A concrete mixer is made up of a rotating drum, a motor, and a trough. The elements applied to create concrete whirls around thus mixing everything consistently.
Concrete processors come in various sizes from the extremely large industrial mixing truck to the smaller, handy concrete mixer. A small concrete mixer is ample for smaller amounts of concrete, up to 2 cubic yards. It’s normally run by electricity and features a wheeled base for easier transfer. Its drum can be tilted at an angle so that concrete can be easily dispensed onto the spot that needs to be cemented. A large industrial concrete mixer truck on the other hand, is applied for mixing as well as carrying big amounts of concrete for use on a construction place. These mixers are computer encoded for constant, accurate mix.
Technology indeed creates modern construction equipment to function efficiently, dependably and quickly.

Electric chain hoist, Electric hoist, Chain hoist, Hoisting equipment, Jib crane, Bridge Crane, Chain Block, Lever Block, Electric chain hoist.

4.Next you need to look at the particular job you are doing. Do you need precision such as setting down a delicate part or are you just doing regular maintenance or fabrication. If you part is expensive, delicate or takes precision placement then you will want to look at variable frequency control on the hoisting motion. If you just need a little precision then consider two speed. Typically American made hoists have a 3 to 1 ratio and foreign hoists have a 5 to 1 ratio. So a domestic hoist with 15 fpm as the top speed will be 15/5 fpm. For general maintenance or fabrication a single speed works fine much of the time. The same control systems goes for the trolley. You can look at variable frequency control, two speed or single speed depending on the precision you need. A trolley brake is also an option to consider.
5.Depending on the horse power of the hoist motor a electric hoist will be offered in single or three phase power. If it is a heavier application you should use three phase power if it is available. Your miscellaneous components such as contactors and motor will run cooler and last longer. If it is a two speed unit, make sure and specify the three phase power as these hoists are not reconnectable. Specify it as 208-3-60, 230-3-60 or 460-3-60.
6.If the hoist is running on a bridge or monorail you will need to confirm the type of beam and size of the beam. You will need to know if it is a wide flange or I beam and the flange width as well as depth. Most hoist manufacturers now offer a wheel that can run on a wide flange or tapered tread of an I beam. In some cases it might even be patented track which will have a 3.33 inch or 3.25 inch lower flange and requires special wheels.
7.You will need to know how you are going to get power to the hoist. Typically it is done with a festoon system, which can be the c track type or tagline festoon. You can also use bar or a cable reel.
8.Looking at a brand that is made or widely distributed in the United States is a consideration if down time is an issue. Some of the foreign hoists do not have a wide distribution channel and thus parts are hard to find or take weeks to get. Many brands have extensive distributor networks so getting replacement parts is an overnight affair

Electric chain hoist, Electric hoist, Hoisting equipment, Bridge Crane, Chain Block, Lever Block, Electric Chain Hoist Manufacturer,

In addition to selling, which also includes competitive financing packages; some comp anies provide Forklift Renting services also both on short and long term basis. These providers also operate fleet of service vans, which are manned by skilled service engineers who are always there to respond to your breakdown call quickly and efficiently so as to keep your forklift trucks in good running condition. Besides this some companies also provide the following additional services: (1)Training of Drivers (2)Inspection of Hoist chains (3)Inspect and issue Lola reports on the hoisting equipmentForklift trucks (4)Inspection and supply of batteries (5)Free Inspection offers Most dealers sell world-class trucks ranging from Mitsubishi, SMV, Combi-Lift, Aisle Master and Lancer products. Regarding hiring of forklift trucks, there are many Forklift renting and hiring companies which offer fleets of trucks capable of lifting anything between 1 to 50 Tons. Types of forklifts rented include narrow aisle electric forklifts; sit down electric forklifts, pneumatic tire LPG forklifts & cushion tire LPG forklifts. Rental forklifts have capacities up to 30,000. Services also include forklift-scheduled maintenance Some models of equipments of Forklifts, which are also sold or hired, are as follows:
Quick-Tach Buckets: These models are designed for “extendable-reach” forklifts and allow you to place material far beyond the reach of a loader (2)Universal Fit forklift buckets, which can be used with any make and model of extendable, reach forklift.
Some of the big brand names in Forklift Services are Big Joe, Clark, Crown, Daewoo, Hyster, Hyundai Forklifts, Lindy, Marklift, and Mitsubishi Forklifts etc.

Electric chain hoist, Electric hoist, Hoisting equipment, Bridge Crane, Chain Block, Lever Block, Electric Chain Hoist Manufacturer

By 1919 Cleveland led the nation in the production of electric batteries and vacuum cleaners (7 different makes of vacuum cleaners were being produced in the city in 1931). In the mid-1920s, Cleveland ranked 3rd in the production of radios, after New York and Chicago. Theodore A. Willard, whose WILLARD STORAGE BATTERY CO. was Cleveland’s largest battery producer, founded the city’s first high-powered radio station, WTAM. By 1938, the Willard Co.’s 15-acre plant, built in 1914, was turning out 15,000 batteries per day.
In the 1920s, John A. Victoreen, an inventive Cleveland radio amateur, started a radio parts business. Soon, however, his attention turned to radiation measurement, and he developed the Condenser R-Meter, an instrument for measuring accurately the intensity and total dosage of x-ray delivery, which gained international fame. Radiation measurement remained a central concern of the Victoreen Instrument Co., founded in 1928 in CLEVELAND HEIGHTS The company provided 95% of the instrumentation for the hoisting equipmet natomic bomb tests after World War II, earning itself claim to the title of “first nuclear company.”
Allen-Bradley, a Division of Rockwell Intl. in HIGHLAND HEIGHTS, is a long-established area firm producing programmable controllers and similar capital goods, incorporating electronics, for manufacturing industries. Keithley Instruments, Inc., based in SOLON, had its beginnings in a high-impedance amplifier, called the “Phantom Repeater,” invented by Joseph Keithley in 1946. This and other Keithley-developed instruments were manufactured for him by another firm for 5 years until 1951, when Keithley moved his operation to larger quarters and began manufacturing on his own. Sensitive measuring instruments remained the core of the company’s output, which came to include voltmeters, ammeters, digital multimeters, and complex testing systems incorporating both computer hardware and software. The company’s product-development path in itself traces some of the most important steps in the technological advance of electronics since the 1940s–vacuum tubes to discrete transistors to integrated circuits, and finally, to complex computer-linked systems that can handle the tasks of measurement and computation virtually simultaneously.